DRYWALL ANCHORS IN PLASTER INSTALL
DRYWALL ANCHORS IN PLASTER PATCH

The thicker it is, the more weight it can hold.Īnother factor to consider is the type of object you are hanging on the wall. The most popular size of drywall is a half-inch (1.27 cm) thick, but people also use the 5/8-inch (1.6 cm). There are different types of drywall, and they all have different breaking strengths. The problem is that people don’t take into account the type of drywall they are using. Just because a drywall anchor is rated to hold a certain amount of weight doesn’t mean it will actually hold that much weight. It’s also heavy-duty and easy to install. The product doesn’t require a pre-drilled hole, reducing the risk of having oversized holes. Just drill a hole big enough for the wall plug to fit and hammer it in place.Īlternatively, you can use a self-drilling anchor like the Qualihome Drywall Anchor (available on ).

DRYWALL ANCHORS IN PLASTER INSTALL

They are also easier to install because you don’t have to worry about the hole size. Wall plugs are made of a harder material and have more holding power than drywall anchors. Your screw should also be long enough to reach the stud.Īnother option is to use a wall plug instead of a drywall anchor. This will give the anchor more surface area to grip the back of the drywall. If you are trying to avoid patching the spot, you can try a few other things. However, a new hole is not always an option. Be sure to drill the hole the correct size this time.

DRYWALL ANCHORS IN PLASTER PATCH

The best way to fix this problem is to patch the old hole with a piece of drywall and start over with a new one. The Wet-N-Fix solution had the best results but was still not perfect. I have used wood filler, Wet-N-Fix drywall anchor repair, joint compound, spackle, and other materials to try and fill the oversized hole with limited success. This will ensure a straighter hole and make it easier to get the drywall anchor in place. The best way to drill a hole for a drywall anchor is to use a cordless drill and secure the drywall before installing the anchors. This seems like a no-brainer, but you would be surprised how many people try to hold the drill in one hand and the drywall in the other.

You also want to be stable when you are drilling the hole. If the gap is too big, the drywall anchor will have nothing to bite into. The hole should be a little smaller than the anchor because this will ensure that it fits perfectly. Most people don’t realize that there is a certain way to drill the hole for the drywall anchor. There's also the molly bolt type things, but I'm a bit worried about putting them in and then not being able to get them back out (or through), since this is a rental.You can blame the poor drywall anchors all you want, but if the holes weren’t drilled correctly, your anchors will never fit perfectly. But I don't want to put bigger holes in the wall if it's not going to work. Has anyone used EZ Ancors in plaster? The EZ Ancor website says it's just for drywall, but the internets hinted that plaster might be a possibility. If that's the case, maybe I need a different type of anchor? I'm not hanging anything terribly heavy, just some towel bars and a mirror (about 10lbs). I'm wondering whether there's plaster hidden underneath the drywall. I've tried enlarging the pilot hole but no luck. I'm pretty sure I'm not hitting a stud (no wood chips coming out on the drill bit). Tapping with a hammer just results in mutilated anchors. I've been trying to use the basic plastic drywall anchors, but they don't want to go in all the way they seem to go into the pilot hole about 1/2 in but not any further. The building is about 100 years old, and from what I can tell the walls are drywall (at least on the outside). I'm having some trouble getting things fastened to the walls in my new rental.

Drywall anchors in plaster